This section is optional reading. It is here for
the reader who wants a better overview of Orgone, accumulator
theory and miscellaneous supporting works including more of my
This is Hermes work relating to the Cosmic force,
that he calls Sol, as translated by R. Steele and Mrs. D. W. Singer.
" Emerald Tablet "
" True it is , without falsehood, certain and most true.
That which is above is like to that which is below, and
that which is below is like to that which is above, to
accomplish the miracles of one thing.
And as all things were by the contemplation of one, so
all things arose from this one thing by a single act of adaption.
The father thereof is the Sun the mother the Moon.
The Wind carried it in its womb, the Earth is the nurse thereof.
It is the father of all works of wonder throughout the whole world.
The power thereof is perfect.
It is to be cast on the Earth, it will separate the element
of Earth from that of Fire, the Subtle from the gross.
With great sagacity it does ascend gently from Earth To Heaven.
Again it does descend to Earth and untieth in itself
the force from things superior and things inferior.
Thus thou wilt possess the glory of the brightness of the
whole world, and all obscurity will fly far from thee.
This thing is the strong fortitude of all strength, for it
overcometh every subtle thing and doth penetrate every solid substance.
Thus was this world created.
Hence will there be marvellous adaptions achieved,
of which manner is this.
For this reason, I am called Hermes Trismegistus,
because I hold three parts of the wisdom of the whole world.
That which I had to say about the operation of Sol
Cone angle calculations.
I must warn the reader that this section is, like
Chapter 7, a creation of my brain , mind, or imagination. As such,
treat it with caution, Prove all things; hold fast to the
The cone has to perform a very difficult task. As
Orgone cannot be held captive against its will, somehow we have
to execute an impedance transformation from the containing cylinder
assembly, to the restriction of the outlet fitting and then to
the Aluminium cell-to-car tube. The scientific problems are challenging;
firstly, because conventional science, in general, denies the
existence of Orgone. Secondly, this mass-less, hard to measure
and invisible force does not lend itself to easy analysis.
So some " loony " must be prepared to at
least make an effort to explain the unexplainable, and stick his
reputation on the line, with at least some form of a theory that
may be eventually corrected and built upon, and thus finally producing
concrete facts. So here goes:
As we are ultimately dealing with frequencies and
the resultant harmonics, all atoms and molecules must have an
individual signature. Thus the cone material harmonics can play
a large part in containing and guiding the dual pulsating Organic
This calculation of complex harmonics of frequencies
is very difficult. So I have chosen to take the easier path of
working from a know parameter and thus obtaining the unknown details.
As there is a relationship between the frequencies and the atomic
weights, and as we have a fair tabulation of these, I will base
my cone angle calculation on the atomic weights of the elements
concerned. At all stages I am referring to the angle formed
inside the apex of the cone.
* You may readily look up for yourself the related
atomic weights, but to save you some work, I will list some of
the ones that are related to my explanation.
Element Atomic weight Element Atomic weight
Hydrogen 1.00794 Carbon 12.011
Magnesium 24.305 Aluminium 26.98154
Silicon 28.0855 Phosphorous 30.97376
Sulphur 32.06 Titanium 47.88
Vanadium 50.9415 Chromium 51.996
Manganese 54.9380 Iron 55.847
Cobalt 58.9332 Nickel 58.69
Copper 63.546 Zinc 65.38
Molybdenum 95.94 Silver 107.8682
Tin 118.69 Gold 196.9665
* Now let us analyse the chief constituents of 316L
Element weight %
As the rest of the elements are 1% or less, I will
them out of our calculations. Similarly the above percentages
are variable and I am using the minimum values that can carry
the 316L name. If you want a more precise cone angle calculation,
use my methodology and tighten up your own figures. You will find
that the final manufacturing tolerance will absorb you numerical
The next step is to add up the related element based
on the percentage existing in the final product, thus;
Element % in 316L Atomic weight Total % in
Iron 72 55.84 40.21
Chromium 14 52 7.28
Nickel 10 58.7 5.87
Molybdenum 3 95.94 2.88
Manganese 1 54.94 0.55
So let us round of to 57 and now call this our cones
internal apex angle in degrees.
Okay, you say, a great play with numbers where, at
one moment we are dealing with apples, and the next moment you
are calling them oranges! Yes, I agree, but let us see if empirical
data gives the same result.
* Remember from Chapter 7, as to how we derived the
outer casing height from two methods. One was my theory and the
other one was the dimensions of working cells, both Joe's and
my own. We will do the same here. Now, I suggested that for a
5 cylinder cell, an inner length of 8 inches and an outer length
of 10 inches worked very well.
I have also previously explained, that the seed centre
is in the center of the vertical height of the cylinder assembly,
as dictated by the magnetic and electric forces. As the height
is 10 inches for the outer cylinder casing, half this height is
obviously 5 inches. So the nodal points would be at 5 inch intervals.
Therefore, the perfect cone would have a vertical ( not diagonal
) height of 5 inches. If we do some basic geometry, you will find
that this works out at about 54 degrees. and a cone height of
4.5 inches would give us 58 degrees. In passing, a perfect ( isosceles
) triangle has 60 degrees internal angles.
Remembering that we are trying to capture the vortex
at the nodal point, thus the 4.5 inches would bring the apex of
the vortexial crossover nicely into the outlet fitting. Bear in
mind that the actual apex of the cone is missing and that instead
we have a 1 inch hole . This 1 inch hole is at the 4 inch vertical
height of the cone, so you want a 5 inch to 1 inch 316L reducer
with a 4 inch base-to-hole vertical height. The 57 degrees falls
very close to the 4.5 inch vertical height, which is midway inside
the compression outlet fitting. Exactly where you want it.
Okay, what about the 4 cylinder cell, how does this fit in with the theory? Lets have a look at it. As an average inner cylinder length is 7 inches, the outer casing cylinder would be 9 inches. As before, the nodal points are half of this, thus a vertical height of 4.5 inches. At a vertical height of 4.5 inches, the cone angle would be 48 degrees, 9 degrees short of what we want for 316L stainless steel.
So unless we used a 7 inch outer casing and recalculated
the seed diameter and the inner cylinder lengths, the 316L cone
would not be optimum.
But what is to stop us using a cone made from a different
material? For example a Titanium cone at an atomic weight of 47.88
or 48 would be perfect, and perfectly expensive. So forget that
one. A lot of experimenters world wide have had good results with
Aluminium cones. From the above table, the atomic weight for Aluminium
is 26.98154, or for my calculation, an angle of about 27. degrees.
As we are dealing with harmonics, the next upper harmonic is 54
degrees ( close to 57 degrees as in the 5 cylinder cell ) and
thus only a fraction higher than the 4 inches vertical cone height.
The end result is that an Aluminium cone would work better than
the same cone in stainless steel of the same aspect ratio. The
1 inch outlet hole is on the 3 inch vertical height of the cone,
so you want a 4 inch to 1 inch Aluminium reducer that has a base-to-hole
vertical height of 3 inches. The 54 degree falls on about the
4 inch vertical cone height, which will be fair way inside your
compression fitting. As this cone cannot be welded to the stainless
steel casing by many welders, a press fit is required. Also, remember
that we want a seamless interior transition and finish. It has
been done and it works very well, but for the general experimenter,
it is far easier to use a stainless steel cone and suffer the
The above two examples may help you with your experiments
on cone angles. There are many number games that you may play
with Nature's mathematics and the above is only one. For example,
you could use the Fibonacci series, ie. 1, 2, 3, 5, 8, 13, etc.
and use it for your cell design, thus inner cylinders diameters
are, 1 inch, 2 inch and 3 inch, an outer diameter of 5 inches,
an inner length of 8 inches and a outer casing length of 13 inches,
with a cone vertical height of 6.5 inches, or half again, ie.
3.25 inches. I have not tried this as yet, but I am very tempted
to do so when time permits.
Note. Most cones
work to some degree or other, what I am trying to do is to optimise
the ideal shape and its related dimensions. From a person who
could actually " see " the Orgone flame, ( Verne Cameron
) the following broad guidelines are worth their value in gold:
* " If the cone is less than 90 degrees, the beam is shortened and brought to a focus."
You may use these angles at you discretion, taking
overall tube length into consideration.
* " If the cone angle is 90 degrees, you will have a concentrated 1 inch beam, which will travel great distances."
A 90 degree cone for the 5 inch cell is 2.5 inches
high to the apex and 2 inches high to the 1 inch outlet. A 90
degree cone for the 4 inch cell is 2 inches high to the apex and
1.5 inches high to the inch outlet. I find these angles too "
flat " for cones and prefer a focussed beam cone construction.
Of course, a dome in some geometric shape would favour this flat
layout but, with the added complication of tuning the dome shape,
ie, elliptical, parabola, circular, etc.
* " If the cone angle is more than 90 degrees, the beam will tend to disperse."
Do not use these angles. They will tend to reflect
the Orgone energy back into the cell and thus make the cell a
great table-top model, but they will not run a car.
From the above, it can be seen, as to why some experimental
cell perform brilliantly on the bench, but will not run a car;
namely the cone angle is too small and the Orgone beam reaches
a focus point before reaching the water jacket of the motor. Again,
you have been warned! If the cell is a stage 3 cell, and the motor
will not run, the cone angle is one of the primary suspects.
How does it work ?
The inspiration, for this section belongs to Walter
Russell a truly amazing being. I have used his great brain to
allow me to explain to you how I think the Joe cell functions.
From Beyond the Atom .
There is a neutral ether consisting of countless
myriads of inconceivably small particles per cubic centimeter
having no electric charge and no mass. Universal mind places electrostatic
charges on these particles when there is a suitable magnetic field
so that the become charged particles. The complexity of the charge
determines the type of charged particle and its behaviour.
The above nicely explains several points to the average
* As ether, ( Orgone ) has no mass or electric charge
it makes it very difficult to measure. If you read about the efforts
that science has gone to, to measure gravity waves and neutrinos,
you will more fully comprehend the problems of measuring these
forces . Suffice to say that just because scientists cannot measure
Orgone energies does not mean that Orgone does not exist.
* As our Joe cell geometry, chemistry, electrolysis,
location, materials and experimenters vary from cell to cell,
the Joe cell will thus produces a whole series of different effects
for different experimenters. The cell can lose weight, cause rain,
heal people, make people sick, create various elements and even
do what you want it to do ie. power an internal combustion motor.
So, how does a Joe cell run a car? Again I will
stick my neck out and suggest an answer that makes sense to me.
Obviously it is a theory and is only in place until a reader suggests
a better theory, in which case I will remove mine and insert his
with full credits.
Have you ever considered exactly what occurs when you use a battery for your radio, torch, etc. I mean what is in the battery that makes your device work and why does it go flat?
There is many chemical and electrical ways of explaining the process, but I would like to explain it to you from a slightly different perspective. Lets set the stage:
1. Every unbalanced action must eventually be balanced no matter how long it takes. Remember that I have mentioned in another section of this book the great clue, Rhythmic balanced interchange. All things in creation including our battery and the Joe cell obey this fundamental rule.
2. Electricity is dividing a pressureless condition into two opposite pressures which desire release and thus a return to a state of balance. So our 1.5 Volt battery for example, does not want to have a positive and negative pole and is trying to return to a state of balance ie. eventually the battery will go flat the duration depending on how much work we ask it to do.
3. Work is the result of unbalanced matter seeking a rest in balance. Notice how we make our battery work for us by letting it return to a state of balance. JUST AS IN THE JOE CELL!!!
4. So the charge of the battery, ( or the Joe cell ) is a pressureless condition separated into two opposite pressures.
5. A charged battery is dually unbalanced by the
opposite pressures which desire release, exactly as in the Joe
cell. Opposites oppose, they never perform any other function
than to oppose. Opposites are not things; they are conditions.
Okay, if we look at the above clues and using the car battery as an example, we can readily see that the electrolysis that occurred in the battery when we charged it via the car alternator has created an unbalance that is frantically trying to return to a state of balance. If you do not believe me and if you are foolish enough, just put a spanner across the terminals of a charged battery and watch it melt and disappear. Please don't do it, take it as fact. In like manner, when we charged the Joe cell, ( which is also acting as an accumulator ) we have created an unbalanced condition that is also frantically trying to return to a state of balance.
A car battery reaches a state of balance by finding an electrical path either in the battery ( self discharge ) or outside the battery in a resistive load ie. turning your lights on. The Joe cell reaches a state of balance if you accidentally short the cell when it is charged, or in the combustion chamber of the car by using the timed spark plug spark or a similar electronic trigger to allow it to drop to a lower or balanced density ( the state it was in before you forced it to do work ).
The result of the Joe cell working is translated
into an expansion of the intake air charge and thus the forcing
of the piston down the bore to turn the crankshaft etc.
Now a few words of mine should fall into place for you. A stage 3 cell is charged ie has sufficient unbalance to do work. A leaky cell is a self discharging cell. A balanced or stage 1 cell cannot perform work. To make the cell work, we must have an efficient transfer to the point where the work is required, ie. we must contain the unbalanced condition until it is in combustion chambers by using the right type of cone, tube, blind plug, motor and electrical connection.
The Joe cell accumulator is constantly trying to
return to a state of balance and given the slightest excuse will
return to balance and thus be useless to you. As you build up
you familiarity with your cell, you will find that the cell is
constantly giving you small clues as to what it is doing. As such
working with the Joe cell is an interactive exercise and developing
the skills of a good observer will be highly beneficial.
A lot of experimenters have tried in different ways
to electrolyse water, and thus as a result of electrolysis, utilise
the liberated hydrogen and oxygen as a fuel to run a car. This
was the original intention of Joe when he planned to run his car
on " steam ". This was, and is, also the intentions
of individuals right up to the present time. They have all forgotten,
or never knew, the fundamental principles of electrolysis, as
formulated by Faraday. His first law is:
The quantity of any element ( or radical, ie.,
group of elements ) liberated at either anode or cathode during
electrolysis is proportional to the quantity of electricity that
passes through the solution.
This simply states that you cannot get something
for nothing! All around the world, different groups and individuals
are constantly claiming that you can run a conventional car motor
from water with basic electrolysis and still have power left over
( over-unity ). Well is you believe that, pigs might fly.
Think about it! Let's say that one horse power is
750 Watts. Let's also say that you require ten horsepower to propel
a vehicle at a reasonable rate. So we require 7,500 Watts. Now,
by Ohms law, 7,500 Watts divided by 12 Volts, ( our conventional
car power source voltage ) is equal to 625 Amps. As a normal car
alternator produces a maximum of 50 Amps, you may start to realise
the magnitude of the problem.
1. For an ideal case, to cause current to pass through
a solution, no minimum potential difference is required. Irrespective
of the liquid in the Joe cell, a certain ( although at times,
small ) current, will flow through the solution in the cell if
any potential difference, however small, is maintained between
the anode and cathode. This current that passes corresponds to
Ohm's law. So if you connect the Joe cell across a 12 Volt car
battery, a current will flow that is determined by the resistance
of the electrolyte. Now if you connect two car batteries in series
( 24 Volts ) across the Joe cell, you would expect it to obey
Ohm's law and that twice the current would flow. But as the Joe
cell is a liquid and highly complex resistance and potential source,
what actually occurs is that the current nearly triples. This
has been verified with extensive experiments by Barry Hilton.
Conversely, if you reduce the voltage across the cell, the current
will be reduced. Using this fact, you can adjust the cell electrolysis
current from minimum, as when the car is not in use, to maximum
during use, as required. This is simply done with one resistor,
or as previously mentioned, you can have a fancy system that is
constantly adjustable. I optimise my cell as I said, by the addition
of electrolyte, until a cell is flowing 1 Amp at 12 Volts for
a running engine and ¼ of an Amp ( 250 m/A ) for a breeding
idle cell, ie. not running an engine.
2. The above conditions only apply if there is no
appreciable polarisation at either anode or cathode plates. By
polarisation I mean the change in potential at the actual electrode
surface that occurs as a result of the current flow and thus chemical
action. In our case, as we use 316L stainless steel, ( the anode
is thus considered insoluble ), this is not a major problem.
A test for polarisation with other materials is to
check the voltage across the cell on turning off the power. If
there is polarisation, you will read a reverse voltage to the
normal potential polarity. The magnitude of this reverse voltage
is the amount of polarisation. This voltage falls off quite rapidly
and should be measured with a high impedance volt-meter.
3. The conductivity of a solution depends upon the
ionic concentration, rather than the total or molecular concentration,
as the undissociated molecules do not conduct current. In our
case, with acids, the degree of ionisation increases
with dilution. This explains why, for example, dilute sulphuric
acid has a higher electrical conductivity than a more concentrated
form. So greater concentration is not better for you electrolyte
in the Joe cell.
4. The pH of a solution, is a convenient way of expressing the free hydrogen ion concentration and thus the acidity or alkalinity of a solution. The normal scale is from pH 1 for completely hydrated strongly acid solutions, to a pH 14 for a strongly alkaline solution. A pH value of 7 is considered neutral. In neutral solutions, the hydrogen and hydroxyl ion concentrations are present in equal amounts. Acid solutions cause an excess of hydrogen ions and alkaline solutions a deficiency of hydrogen ions, ie. an excess of hydroxyl ions.
For example, pH 4 = 0.0001 gramme ions per litre, and a pH 5 = 0.00001 gramme ions per litre, etc.
It is important to realise, that the pH is a measure
of the free or active acidity or alkalinity of a solution, and
not of the actual acid or alkali concentration.
More on pH if the above is too simple
( Courtesy ETI magazine).
All acids have at least one hydrogen atom that tends to break away from the molecule when the acid is dissolved in water. In doing so it leaves behind an electron and becomes a positively charged hydrogen ion. It is these free hydrogen ions that are responsible for the chemical properties of acids, and their relative numbers determine the strength of the acid in question.
Alkalis are extreme examples of a class of substances known as bases. Bases are like converses of acids. When they are dissolved in water they tend to break up in a negatively charged hydroxyl ion and a positively charged residue.
Bases and acids in the same solution tend to neutralise
each other. The free hydrogen ions from the acid combine with
the free hydroxyl ions from the base to form molecules of water.
The reaction between hydrogen and hydroxyl ions can also proceed in the other direction. That is, water molecules can break up again into free hydrogen and hydroxyl ions. There is only a slight tendency for this to happen, however. In pure water at room temperature only about one water molecule in ten million dissociates into ions. In other words, the concentration of free hydrogen ions in pure water is one part in ten million. This concentration of hydrogen ions is known as a neutral solution.
If an acid is dissolved in water, the solution will no longer be neutral, there will be more hydrogen ions because of the dissociation of the acid. Dissolved bases will initially result in a solution that has more hydroxyl ions than neutral water, but these hydroxyl ions will tend to combine with any free hydrogen ions to form water molecules. The net result is that the number of free hydrogen ions in a basic solution is lower than neutral water.
Clearly if we can measure the number of free hydrogen
ions in a solution we can find out if it is acidic or basic, and
to what extent. Actually what we will be interested in is not
the absolute number of hydrogen ions, but their relative numbers
ie. their concentration.
For reason of mathematical convenience and logical purity, chemists prefer to work with a quantity known as the activity of hydrogen ions. Since the activity is generally proportional to the concentration, the exact distinction between the two terms need not concern us here.
The range of possible values for hydrogen activity is very wide, from 10 for the strongest acid solution to 10 to the minus 14 for the strongest alkali. This leads to numbers that are awkward to writer and even more awkward to speak.
The pH notation which was introduced in 1909 by the Danish chemist S.P.L. Sorensen, makes things a bit easier. It defines pH as the negative logarithm of the hydrogen ion activity ie. pH - logA.
As mentioned above, low values of pH indicates acidity,
high values alkalinity. Neutral water is pH 7.
Over countless years, various experimenters, professional
and otherwise, repeatedly reported the discovery of unusual phenomena
that could not be explained, or that did no fit in with the known
laws and theories that existed at the time of the discoveries.
The easiest method employed was to shelf the idea until more became
known while scientists " came up to speed " on the subject.
In Chapter 3 is a list of the different names given to
one of these mysterious group of forces.
Although all the various scientists were working
on the same type of force, due to a lack of formulated and written
characteristics of this force, each scientist re-discovered the
same force and gave it a new name. Well, nothing has changed.
Orgone as a name, is not the flavour of the month, but torsion
and axial fields are. It really does not matter what name you
give a rose; it still smells the same. Similarly, our cosmic life
force behaves the same, no matter what some scientist decides
to call it. I am only belabouring the point to make you aware
that torsion and axial fields are not a new discovery, but the
same old force with a different coat.
Some properties of torsion fields, as presented recently
by Yu. V. Nachalov and A. N. Sokolov: ( Try web site www.amasci.com/freenrg/tors/doc17.html
* They exhibit phenomena associated with the fifth force.
* They cannot be shielded with metal screens.
* They have velocities billions of time greater than the speed of light.
* They can affect the of weight of objects.
* They can propagate in the future as well as in the past.
* They can transmit information without transmitting energy.
* They propagate through physical media without interacting with the media.
* They cannot be shielded by most materials.
* They can be shielded by materials with a certain spin structure.
* Any nuclear spin-polarised object is a source of torsion fields.
* The interaction of a spin polarised particle with a spin polarised object, results in
the appearance of anomalous forces which depend on mutual spin orientation of the
particle and object.
* Each physical objects, in LIVING or NON-LIVING Nature, possesses its own characteristic
* They can be observed by Kirlian methods.
* Any permanent magnet possesses its own torsion field.
* Pyramids, cones, cylinders, flat objects, triangles, etc. are torsion field generators.
* Aluminium is an effective shield for torsion fields.
* Aluminium mirrors will reflect torsion fields.
* A combination of geometrical shape and high voltage will cause a reduction in gravitation.
* Many effects remain up to four days after the torsion field is removed.
* They are identical to the transverse spin-polarisation of the physical vacuum.
* They are shielded by artificial materials possessing orthonormal topology of structure.
* Torsion field has a cone shaped spatial configuration.
* They significantly alter the oscillation of quartz crystals.
* Torsion fields can alter the process of radioactive decay.
* The charged object must not be subject to any shocks, otherwise the torsion field charge
will disappear, as torsion fields are closely coupled to inertial forces.
* They can be generated as the result of the distortion
of the geometry of the physical vacuum.
Torsion field references amount to over 10,000 articles
belonging to about 100 authors. Over half of these work in Russia.
So dear reader, if you want to track down the properties in detail.
you have more than enough to keep you busy for a long time.
To summarise the above, all these so-called new torsion
and axial field properties match exactly the properties
as given to you in this book and that were known for hundreds
of years. At such, apart from a change in name, we have additional
irrefutable and current verification that the Joe cell is a simple
Orgone ( or life force ) accumulator.
For the astute reader, I am sure that you can think,
( with the use of some of the above newly mentioned effects )
of methods of improving your basic cell to make it less leaky,
thus acting as a better container of Orgone.
A very old warning states that Cosmic fire can consume
the unready; man is warned that to tamper with the energies of
the Universe is forbidden until he is prepared through inner transformation.
As this transformation is far from completion in
the majority of mankind, we have a sorry state, where critical
information on Cosmic energy and its utilisation have to be carefully
guarded. As all energies can be used both for good and bad, the
end result is that a few have used these powers for the control
of the majority. As such, information on the Cosmic forces is
very hard to come by at the grass root level, where we, the minions
Throughout history, various scraps of information
have been published that has given the inquiring researcher enough
data to enable him to piece together at least the rudiments of
the power source and the related construction.
As Walter Russell said, " Everything which
seems at rest depends upon violent motion to make believe it is
at rest. " So, this seeming stillness that surrounds
us is a seething sea of violent motion. By unbalancing this rest
and balance, we have endless power at our fingertips.
Also, as quoted by Walter Russell from The Divine
So, dear reader, as you can see in the above, the
energy is a rhythmic, balanced interchange of two streams as is
our Orgone force, a pulsating, dual expanding and contracting
vortex. All expressions of energy seek a point of rest, and return
to a condition of rest. Our Joe cell concentrates this rest energy
and in this concentrated, unnatural state, the energy is desperately
trying to return to its base or rest state. We allow this to occur
in the combustion chambers of our motor, and the resultant return
to rest of the Orgone energy creates the work that powers the
I will now mention other quotes regarding the Cosmic
force, from far less authoritative individuals than the Almighty.
The following is a communication received and written
by Carlos Zelaya in 1971:
" In Cosmic Energy, or the energetic action of Cosmic Rays, we find it is in itself an undrainable energy source within the reach of all the Universe. To take advantage of it at any experience we must use as departure point some elemental concepts based upon Cosmic laws.
This energy moves itself within certain fields or
strips, both at infinite space as within the geomagnetism of heavily
bodies. To achieve tapping and concentrating it, it is necessary
to make geomagnetical study of the planetary area, as a deep study
of astral or astrological motions, according to your language.
.......Considering that these rays move and behave in a given
way according to solar and lunar motions, and with the combination
of both and of planet Mars, which is the main reflector of this
solar system for Cosmic rays, they are the most fitting for the
experiences of exiting the atomic nucleii. "
Additionally, the following was received by Carlos,
also in 1971.
" To condense cosmic energy it is needed a device somewhat different to the ones presently used on Earth.
It is not only different but its variations lies upon concepts and principles related to its construction, on Earth are taken as principles physico-chemical phenomena, etc.. We take as principle the ELECTROCOSMIC phenomenon, which is the energetic manifestation of the WHOLE's Elemental Laws.
Therefore, for energy-accumulation, we take into
Also, the following was received by Carlos in 1971.
" The phenomenon because of which cosmic energy
is condensed is:
1. Because its natural atoms are ACTIVE MATTER.
2. Because it is " active matter ", it
is possible to condense and fix it.
To fix its condensation it is necessary that the energy levels be active enough, for the later, with the polarisation " shock ", be formed the layers of matter, which only through their atom's excitation it is active and generates, by reaction of impulses, a given wavelength.
With this simple principle, but highly positive,
it is attained the concentration of ( cosmic ) energy into layers
of NATURAL matter and its generation of regulable fields according
to the excitation it is made to undergo, for the natural matter
of the Cosmos is an energy source. "
I have left the translations as received, you may
want to manipulate it into more " correct " English.
You may want to read an article by Rick Anderson
and his explanation on the Poynting vector and the Lorentz force.
See his article at ( http://www.tricountyi.net/~randerse/lgf.htm
). This article will explain to you the reason for the rotation
of a suspended magnet that is placed near a charging vat. Also,
it will partially explain to you the reason for the concentric,
cylinder within cylinder design of the basic Joe cell. In brief,
if you do not have Internet access, I will quote the main paragraph:
" The third vector ( Lorentz/Poynting force
), then , must appear at right angles to BOTH the electric and
magnetic vectors, at all points around the perimeter of the subject;
and so it manifests as a CIRCULAR ORBIT OF FORCE AROUND THE SUBJECT
WITH A PREFERRED DIRECTION, similar to a rotating energy field
or vortex. The direction of this circular Lorentz can be switched
between clockwise and counter-clockwise simply by reversing the
polarity ( or physical connections to the coils ) of the amplified
signal driving the coils. A North pole at the top, with a South
at the bottom, will cause the Lorentz force to circle counter-clockwise,
and a S-N clockwise. "
This has been explained in earlier chapters, of this
You may want to read " An Analysis of the Joe cell from a Biodynamic Perspective ", By Guy McCarthy. Although I disagree with a fair portion of his conclusions, nevertheless, there is a lot of good background information for the Joe cell experimenter. It is available on web site:
Orgone in relation to some other energies. By Lawrence
" In the late 1950's, Gaston Burridge published
an article on " cone " energy. He discovered a form
of energy which, he states, his and others' experiments show come
in a beam from the apex of a cone or pyramid made purely of metal,
or cardboard or wood covered on the outside with metal foil, especially
brightly polished foil. Here one is reminded of the orgone accumulator,
especially the funnel accumulator, but we must notice that the
metal is on the outside of the organic material, not the reverse;
nor need there be any opening at the apex, as is the case with
the funnel. To the best of my knowledge, the radiation comes in
a beam from the apex rather than equally from every
surface of the metal. The beam is as intense at night as at daytime,
this seems to eliminate sunlight as the direct source of the energy.
The research of Karl Von Reichenbach. By Kenneth
Strarz, ( quoted in selected parts ).
" Baron Karl Von Reichenbach was a nineteenth
century scientist whose amazing researches have been almost totally
forgotten. He discovered the fundamental new energy, odyle, the
same in major respects to Reich's orgone. in support of his discovery
he performed literally thousands of controlled experiments, publishing
the results over a twenty year period. Reichenbach did not reckon
with the terror and hatred that the human being feels when confronted
by life specific energies.
Reichenbach was born in 1788 in Stuttgart. In chemical
research he discovered creosote, paraffin, eupion and pittarcal.
from 1845 until his death, he tried fruitlessly to convince his
colleagues of his discoveries. he did a huge amount of research
in the unseen properties of magnets and crystals. Crystals and
magnets observed in the dark showed flames rising three inches
from the ends, shaped like a tulip. They were very beautiful and
moved constantly. He named the new energy odyle.
In addition to magnets and crystals, Reichenbach
described eight other sources of odic energy: living organisms,
the sun, moon and stars, heat, friction, artificial light, chemical
reactions, electrical charges, and the material world in general.
He discovered that the odic processes in the human body interacted
with other sources of odic energy. Reichenbach discovered that
a strongly charged body could alter the natural charge of another
substance by contact.
His final conclusion is .....that the odic force
is a universal adjunct of all matter in variable and unequal distribution
and that this force is one which extends over the entire universe.
As stated above, there is a vast amount of recorded
data, but unfortunately not easily available, as most of his work
has been out of print for over one hundred years. His work is
vital to any reader that attempts a thorough understanding of
the Orgone force.
The work of Georges Lakhovsky.
Lakhovsky states that every living being emits radiations.
If you read his book " The secret of Life ", you will
easily see that the experimental results obtained with various
shaped spirals is a direct tie-in with our Orgone energy topic.
Similarly, you will see how the " Y factor " ties in
to the body's emitted radiation. Again, good reading for the researcher.
Some very interesting comments from the great Erwin
Schrodinger one of the founders of quantum mechanics and well
respected by his peers. The comments nicely tie in with the Orgone
force and living organisms:
"...Today it is believed that living organisms
feed on energy and various kinds of foods have different energetic
values. This is an absurdity. ...in any point of the universe
entropy increases and the living organism continuously produces
positive entropy, too, and so everyone is drawn
towards a state of maximum entropy, ie., to death. To avoid this
state and so to be alive, the living organism decreases his entropy
continuously extracting the negative entropy from
the environment, including food..."
What a lovely way of stating that we require Orgone
( which has negative entropy ) and thus by logic we will interact
with any Orgone source, including a Joe cell! Again, the Y-factor.
To finish this very brief section on past information,
I will mention some important research information from Reich.
The effect of Deadly Orgone Rasdiation. ( 1961
) Compiled by Charles R. Kelley in Radix
"·Dor is an abnormal life-inimical form
of orgone energy. it is present recurrently throughout the Earth's
atmosphere, is present chronically in large regions of it, and
Dor is an immobilised stagnant energy that seriously
interferes with normal orgone energy metabolism, both of atmospheric
and of living orgone systems.
Whereas orgone energy normally gives the sky a light
blue or blue grey appearance, DOR-infested regions of the atmosphere
appear dark, sometimes blackish or purplish black. Normal orgone
energy is in constant motion, flowing, flimmering, or pulsating,
while DOR is still and oppressive.
The stillness of DOR-infested atmosphere makes them
especially subject to pollution of all kinds. Urban smog appears
principally and most seriously in atmospheres immobilised by DOR.
Animals or plants exposed to heavy or chronic dor
concentration are seriously disturbed in their orgone energy metabolism,
which is dependent on the external orgone energy field in which
they live. Continued exposure can result in grave disorders and
eventually, even death for plant and animal alike.
A tree exposed to a DOR infested atmosphere dies
in a particular way. DOR is attracted down onto the tree from
above. The top of the tree therefore is usually affected first.
the leaves curl and die, and the bark disintegrates and peels.
The tops of outstretched branches, usually near the top of the
tree, are next affected. The bark on the tops of the branches
turns dark and disintegrates. The tree dies from the top down
and from the outside in.
In areas of extremely high DOR concentration, exposed
rocks begin to turn black. The black usually begins in small spots,
and expands to cover more and more rock surface.
When DOR is removed by the use of the Reich apparatus,
it becomes concentrated around the equipment. This concentration
can become so serious as to be a hazard to life."
The Core men.
I have no intentions of boring you with any conspiracy
theories or my phobias. I will quote Reich directly:
" 1. The CORE men ( Core = Cosmic Orgone Engineering
), as I came to call them, apparently were thoroughly conversant
with the laws of functioning in the cosmic Or energy ocean, especially
with gravity as a function of superimposition.
2. They use cosmic Or energy in propelling their
5. The CORE men were obviously riding their space
ships on the main Or energy streams of the Universe."
There is much more on the above in the Orop Galactic
The Orgone Energy motor.
I will mention in brief, some references from Dr.
Reich's work, in relation to a method of utilising Orgone energy
to power a motor. The full details were published in 1948 and
1949, and the reader may refer to these for full details.
For his radioactivity work, Reich used a Geiger Muller counter. As a result of many experiments, he noticed reading anomalies with some of his experiments. Basically, he noticed increased reading with the counter dependent on Orgone concentrations. This eventuated in Reich eliminating the normal Geiger Muller tube and replacing it with his own specially made tubes. He named these Vacor tubes.
These tubes were evacuated to .5 of a micron, which
is below the level that normal ionisation would occur. As a result
of charging these Vacor tubes with Orgone energy, he discovered
that they would produce a high pulse rate on the GM counter. This
led Reich to further experimentation, resulting in the modification
of the standard counter circuit in such a way that a small motor
could be made to rotate directly from the Orgone energy.
This motor was a small AC type made by Western Electric,
with a type number of KS-9154. It would run when Reich connected
an antenna and/or earth to the modified GM counter. It would
also rotate whilst under the influence of a field enemating from
a living creature. The rotation of the motor was quite
unusual as it could reverse direction spontaneously without significantly
slowing down and speeding up again as if the motor had no inertia.
The rotational speed also varied unexpectantly and could be made
to run faster or slower, depending on the person that had his
hand near it.
Reich explained the above idiosyncrasies, by referring
to a force he called the " Y factor." He refused to
divulge what the Y factor was, and mankind will have to wait till
the year 2007 AD, when his sealed archives will be opened. As
already mentioned, I am very confident that the Y factor simply
stand for YOU, meaning that the individuals Orgone field interacts
with the experiment. This has occurred over and over with experimenters
interacting with the Joe cell.
For the more dubious reader, I will quote directly
some of the comments of witnesses that were present, when Reich
was demonstrating the Orgone motor:
" ....it involved the use of an accumulator
attached to a motor; concentrated Orgone energy was triggered
by a small amount of electricity, an amount insufficient to rotate
the motor without the accumulator......When powered by the combination
of Orgonotic and electrical energy, it ran smoothly and quietly;
but the speed varied depending upon the weather....more rapidly
on dry, clear days, more slowly when the humidity was high. "
" Reich first used vacor tubes in series attached
to a small accumulator and connected to a transformer to build
up an electric charge to excite the Orgone energy. He used four
or five vacor tubes. All were connected to a 25 Volt electric
motor.....Reich took away one vacor tube after another until all
were taken away, and still the motor ran. The important ingredient
was the so-called Y factor which Reich did not divulge. .....On
Orgone energy , the motor was practically noiseless and ran smoother
and faster. At times, it would change direction. In damp weather,
it would not run. "
" The one I saw was about the size of a large
orange.....It was hooked up to a special Orgone accumulator with
the Y factor that Reich did not divulge as he felt mankind was
not ready to use such a potentially boundless power rationally.....But
the motor ran on atmospheric orgone energy fed to it through the
accumulator and also from the human energy field.....It ran erratically,
as no motor with a mechanical energy source does: It slowed down
and speeded up without any interference. Also, if one curved his
hands over the motor, it picked up speed, and with one's hand
over it, it speeded up and slowed down....It reversed itself every
once in a while without slowing down, even without a jolt. "
As you can see, there is a large and undeniable link
between the atmosphere, living organisms and the Orgone motor.
In a movie sequence that Reich made, the is a demonstration of
the motor not turning until Reich placed his hand in the vicinity
of the motor. The motor then ran until Reich removed his hand.
So if we are not dealing with a living force, I would challenge
the reader to offer me a logical, scientific reason to the contrary.
Please, don't bother replying with references to tricks with mirrors,
RF transmitters or any other circus act type explanation.
Again, let me state that the above is a very, very
small sample of the vast amount of recorded data in our historical
The present lies with you. There are many teams spread
all over the world, that are experimenting with Orgone accumulators.
These teams are working with the Cosmic energy for many and varied
applications. The Joe cell and its application, is a very small
section of the overall research work. The majority of the effort
is in four main areas:
1. Weather control. There has been a vast amount
of knowledge gathered in this application. Reich himself has written
hundreds of pages on his cloudbusting operations. A more recent
individual is Trevor Constable. The book, " Loom of the Future
", by Thomas J. Brown from Borderland Science Research Foundation,
is a fair overview of the present state of the art.
2. Water modification. This area has a smaller following,
but is amply covered on the Internet. Basically, it involves the
use of either egg shapes or vortexes or both, ( after Viktor Shauberger's
work ), to modify the water structure and the enclosed Orgone
energy. The end result is a living water more suited for all living
organisms. There is a lot of literature on this. Check the Internet.
3. Health uses. This is the one that caused the demise
of Reich and his works. He, and many others that have since copied
him, have discovered that the Orgone accumulator can have wondrous
curing abilities, with many claims of cancer cures. A lot of literature
on this. Check the Internet.
4. Covert uses. Since recorded history began, secretive
groups have exploited the majority by withholding huge advances
in technology. This has not changed, and will not change in the
near future. It is indeed very frustrating experimenting with
your pieces of stainless steel tubes and your Joe cell, when the
chosen few are laughing their heads off, watching you trying to
recreate the wheel.
So, as far as the present is concerned, we have basically two groups, one covert and way beyond any technology that the average person can imagine, and the other a huge team of back yard and academic
experimenters, stumbling and bumbling their way through
To quote Walter Russell directly, regarding a future
new source of power ( written 1957 ):
" The first stage to be transmutation of the
atmosphere into free hydrogen, then, generations later, by transforming
solar radiation into solar generation as man's ultimate fuel.
This would not only free him from dependence upon earth's resources,
but give him complete power to cause rains wherever he desires,
on desert or meadow, and to dissipate cyclones while forming.
A chief source of Orgone, is solar radiation.
The future depends on us all. If we interchange our
research for the good of all, (which is so easy now with e-mail
and the Internet ) we will be able to make quantum leaps in our
knowledge. thus the gap between covert and freely available information
will close. The end result is a better world for the majority
and not just for the chosen few.
The contents of Joe cell chapters
What is the Joe cell
Some Properties of orgone
Some names for the life force
Theory of Cell Design
materials and design
Sizes and diameters
Water types and relations to cells
Charging the water cell
Connectioning to motors
When Things go wrong
Some Readers contributions
Brotherhood of Man
A Joe cell parts supplier
index page where the contents of these chapters came fom