After 6 years of experimentation, I made the assumption
that the Joe cell was working on Orgone energy. This assumption
came as a result of hundreds of hours of reading and experimentation.
In all that time, all the recorded effects of Orgone, ( and there
are hundreds ) have matched the behaviour of the Joe cell. There
has never been a departure from the known recorded effect of Orgone
energy, not even one! As such it would take a far
braver man than I to argue with the huge supporting evidence of
thousand's of man-hours and the work from hundreds of qualified
individuals from all over the world. So, as my own humble experiments
agree with the majority, I have said, and will repeat many times,
the cell runs or more correctly, accumulates Orgone energy.
Sometimes I have to restate the obvious, namely,
if we are to accumulate Orgone energy, we must have an Orgone
accumulator! We are not designing this cell to use Neutrino's,
Deuterium, Nitro-glycerine, steam, Nitrogen, Hydrogen, Hydroxy,
or any other author's pet opinion to the contrary. You will have
to read other publications for those topics and cell designs,
this train goes to Orgone country. We are designing our cell
to run on Orgone energy! When I say " we ", I am
assuming that the reader is following suit, and will build a cell
closely matching these instructions. As such, a close study of
the chapters on Orgone properties and cell polarities would be
in order. If you were a naughty boy and skipped over these sections,
I would suggest that you read them now. So what have you discovered?
You should be in agreement with me on at least two points, ie.
that the cell should use as many of one type of Orgone polarity
materials and properties as possible, and additionally, we want
to utilise as many as possible of all external forces available
to us to assist us in the accumulation of the Orgone energy.
Are we on the right track with our Joe cell accumulator?
What would we aim for in the design of a perfect energy accumulator
? Is there any better way to go? Maybe we are on the wrong track?
At this stage it may be a good idea to consider the design parameters
for the ultimate energy source. After all, why waste our time
with the Joe cell if there is a " better " way of getting
our energy. Better meaning, cheaper, parts effective, less polluting,
less destructive, longer lasting, etc. If we look at the quote
from Viktor Schauberger at the start of this chapter, "...
natural, silent, simple and cheap..." is a very good starting
point. Let me give you a brief list of the requirements of this
magic accumulator and see if we are on the right track with the
* The Joe cell is natural as it operates on the life
force ( Orgone ). It is the only natural man-made energy producing
device that does a direct interchange from a primary energy source
to the final energy supply. As such it seems to provide "
free energy " and thus be an impossibility. This is a huge
stumbling block for people who do not understand the concept of
" free energy ".
* The Joe cell is silent. There are no moving parts.
A solar panel or Peltier effect device would be the closest highly
* The Joe cell is simple. No moving parts, a set
of cylinders and water, you could not get it any more simple.
* The Joe cell is cheap. After the initial outlay,
there are no further material costs or replacements required to
worn-out parts. The Joe cell is virtually everlasting. If you
build one with second hand components, your total outlay should
be under AUS $200.00
* When we use energy that is at its fundamental stage
ie. the energy cannot be broken up into any other energy constituents
that are at a smaller level; we have no waste by-products and
thus no pollution. The Joe cell runs on the life force energy
( Orgone ) which is a fundamental force of the Universe. You are
not going to get any more basic than that!
* Any centrifugal, expanding and exploding force is wasteful due to the creation of heat. Any device that generates heat as part of its operation can never be considered an efficient energy source.
Nor can it ever be an over unity device. The Joe
cell runs cool and so does the motor that runs from it.
* Any energy produced from a set of conversion stages
is wasteful. For example, a nuclear submarine has a nuclear reactor
to create heat. The heat is used to create steam from water. The
steam drives a steam turbine. The steam turbine is used to run
an electric generator. The electric generator is used to drive
an electric motor. The electric motor turns a propeller. The propeller
twists in water thus providing a thrust. The thrust propels the
submarine. You would have to be kidding! No wonder that superior
beings roll on the floor with laughter on observing our "
technology ". How unnatural is all that? The Joe cell converts
the primary life force ( Orgone ) into an expanding multiple use
force in one step. Beautifully simple!
* The Orgone does not have to be stored or converted
and stored. It is an on-demand system and thus there is no infra-structure
required to store, distribute, ship, sell, etc. Unlike petrol,
it is the same price each week ( free ). Definitely not good news
for the oil multi-national concerns. Maybe that is why we are
not using this force? < grin>.
So to summarise, I would say that, ( to the best
of my knowledge ) as there is no alternative energy device to
compete with the Joe cell, we would be on the right track if we
build a cell that ran on Orgone. Please note that the Joe cell
and its construction has limitations and negatives as you have
already read and will read in later chapters. As we do not live
on a perfect world, we are not perfect humans and the Joe cell
is not a perfect device.
Making a theoretical cell
By reading through the list of Orgone properties
and selecting the ones that look useable, you should have selected
Property 14. As it has
a preference for a vertical and constant upward alignment, we
will have the outlet of our cell at the top most point of the
Property 6 As it can be
manipulated, it means that we can build a container to house it.
We will have cylindrical cylinders, concentric and with a vertical
axis to fit in with Property 14.
Property 10. As it is
absorbed in water, we are going to make a water cell. As we are
dealing with water, the cell has to be water proof and non corrosive.
Property 20. As it can
only be concentrated to a final amount, we know that sooner or
later something will occur in the vertical plane and with our
outlet located at the top of this vertical axis, ie. Property
14, something will come out.
Property 9A As it moves
in alignment with a magnetic field, we know that if we place one
of our potential's at the bottom of our " conductor ",
and the other potential at the top of our " conductor "
a magnetic field will result and the Orgone field will move in
the same direction. As our conductors are the metal cylinders,
they now must have a concentric vertical alignment to fit in with
Property 14. As we are dealing with magnetic fields, our
cell material should not interfere with the chosen field that
assists the Orgone to follow in a vertical alignment. Also, as
we are dealing with water, electrolytes and magnetism, the cell
material suitable for the simple cell should be stainless steel
with a low as possible magnetic residual. Just on the side, our
" conductor " is a complex combination of water, stainless
steel cylinders and ion flow. Nevertheless, it will create a directional
Property 9B. As it move
at right angle to an electrical field, our concentric vertical
cylinders prove a perfect match, ie. the electric current flow
is from the inner most cylinder, to the outer most cylinder in
horizontal lines. As the Orgone flows at right angles to this
field, the end result is again a vertical alignment of Orgone.
Now, from the table of Orgone polarities, we can
get a few more " helper's " to coax the Orgone force
to work for us;
The electrolysis will be very interesting to it,
and as Joe said, connecting the power to the cell when the engine
is running is like switching the turbocharger on full boost, man
you are off! Like wise the friction from the reciprocating parts
in the engine will get it to go in and have a peek and then, "
got you! ", we can use it! The sound and vibration are additional
bonuses when the car is running.
For the electronically versed readers, let me explain
to you one way that the cell acts as a concentric energy accumulator.
It is a well known fact that the charge of a capacitor is proportional
to the surface area of the plates. Similarly, we know that the
potential increases as we bring the plates closer together. Now
look at the beauty of the Joe cell. We have a set of concentric
plates with an obvious reduction of surface area as we move towards
the middle of the cell, ie. as the cylinder gets smaller in diameter,
the surface area reduces proportionally. Now, as the surface area
of the cylinders decrease towards the middle, we automatically
have the charge increasing as we move towards the center!
Therefore, the greater the number of cylinders, the greater or
more intense is this charge build up. So, thrown in at no extra
design cost is an automatic magnifier for the Orgone force that
is concentrated automatically at the center of the cell. The above
applies only if the water can act as an dielectric, ie. that it
does not have too many ions in the water. Thank you Nature! By
the way, on a larger scale, the earth is the middle of the accumulator
and the different atmospheric layers are the cylinders that concentrate
the sun radiations.
We now have a theoretical cell. It is made from a
plurality of concentric stainless steel cylinders in water, with
an application of a suitable electric and magnetic field, and
a top-located outlet on a vertical aligned cell.
So, the above is the layout and the logic in the
construction of a theoretical cell. Now, dear Joe did not do any
of the science, did not know any of the scientists, did not read
any related books and did not know what Orgone was, but by a stroke
of sheer luck and intuition, he made his final cell in the above
configuration, and the rest is history! Yes, dear friend, our
theoretical cell is exactly how you should make you practical
working cell. This will be explained in the next chapter.
The contents of Joe cell chapters
What is the Joe cell
Some Properties of orgone
Some names for the life force
Theory of Cell Design
materials and design
Sizes and diameters
Water types and relations to cells
Charging the water cell
Connectioning to motors
When Things go wrong
Some Readers contributions
Brotherhood of Man
A Joe cell parts supplier
index page where the contents of these chapters came fom