As all known effects of Orgone are seen in the functioning
of a Joe cell, it is reasonable to assume that the reader should
have a good working knowledge of Orgone energy. Additionally,
as the cell obeys all known Orgone laws and as the cell's operation
does not contradict even one Orgone effect, it is safe to assume
that this is the energy that is utilised in the cell. In honour
of, and respect to one of the world's great, forgotten, and scorned
scientists, namely Wilhelm Reich, I will continue to use the name
Orgone as used by Reich. A multitude of other scientists, great
and small, have given this mysterious force a name. In a following
chapter I have listed at least 70 names by various individuals
for the same or a similar force.
Orgone energy is the live cosmic energy of Nature. To quote Reich ... The Cosmic OR Energy fills the universe ... and ... it is a spontaneously pulsating, mass-free energy ...
For interested readers, there is a huge collection
of facts, opinions and absolute rubbish on the Internet regarding
Reich and Orgone. As the aim of this book is to focus on the Joe
cell, the above definition will suffice.
Some properties of Orgone energy
Thousands of properties have been observed for the
life force and I would like to list and explain the main ones
relating to the cell.
1. It is mass free. ie. Orgone energy has no inertia
or weight etc. So conventional test equipment that requires a
reaction or something to " push " against to measure
a force will be ineffective.
2. It is present everywhere, but more importantly
to the Joe cell user, the concentration is variable from place
to place and from time to time. Therefore, if the cell is leaky
and located in a low concentration area, it may stop breeding
or even loose the seed. The external signs are a motor that will
not produce full power or will not run at all.
3. It in constant motion. It has an uneven movement
from West to East at a speed considerably greater than the earths
rotation. The motion is a pulsating expansion and contraction
and a flow normally along a curved path. Inside an accumulator,
the energy is emitted as a spinning, pulsating wave. Both of these
can be seen to varying degrees in a charging vat and/or cell.
These signs are very important to the experimenter as they are
his tools in the different stages of seeding and breeding of the
4. It negates the laws of entropy. Orgone energy
flows from lower concentrations to higher concentrations ie. Orgone
attracts concentrations to itself. This is the normal process
of creation and as such is a proof of Orgone being a living energy.
For the experimenter, this is very important, especially in the
seeding stage. If the cell is located in an unfavourable location,
it may not seed or take a long time to seed. I have had cells
taking 4 weeks to seed, others take only a few days.
5. Matter is created from it. Under appropriate conditions,
which are not rare or unusual, I have had different minerals formed
from identical cells. This in my case is usually a white or green
powder that forms as very fine colloid that eventually sinks to
the bottom of the cell. You definitely do not want this to occur
in the Joe cell as the cell will not run the car and the only
solution is to completely dismantle, repolish and clean all components.
For the sceptical, you may assume that the deposits are coming
out of the water. I strongly disagree.
6. It can be manipulated and controlled. We do this
in the cell by forming alternate organic and non-organic "
cylinders " to form an accumulator for the Orgone. Thus the
organic layers attract and soak up the Orgone and the metallic
layers draw it from the organic material and radiate it into the
interior of the accumulator. Additionally we use electricity,
magnetism and electrolysis to assist with the breeding process.
7. It comes from the sun in vast quantities. As such,
allowing for thermal lag, the Orgone density peaks in the afternoon
and diminishes in the early morning hours. As people have found,
a leaky cell will not function as it " dies " around
3 am to 4 am.
8. It is affected by weather, ie. humidity, cloud,
temperature and time of day affects the accumulation of Orgone.
For the experimenter with a leaky cell this explains the weird
behaviour of leaky cells ie. sometimes they work, other times
not, but if you stand on one foot, talk to it, try different water,
chemistry, more or less power etc. it will " come good ".
This has created a whole religion of what you must do or not do,
to such an extent that with the blind leading the blind, the cell
in the hands of a casual constructor is doomed to failure.
9A. It moves in the direction of a magnetic field.
This is highly significant to the cell builder. This factor controls
the position and polarity of the cell's internal wiring as well
as controlling how much residual magnetism the steel can have
and still allow the cell to work. This is critical in the choice
and cutting operations of the related metals. Again, a whole mythology
has developed around this area. From reading previous material
on the subject, it seems that the steel has to be cut by vestal
virgins in the Black Forest on a moonlit night!
9B. It moves at right angle to an electrical field.
Again, highly important, as it dictates polarity and wiring connection
to the cell.
10. It is absorbed by water. This is one of the reasons
that we use water in the cell. To be successful, the water has
to be the right type of water. By the way, for example, we could
have used bees wax instead of water, but as we want to encourage
the breeding process with all the tricks in the book, the bees
wax would have prevented the use of electrolysis.
11. It is polarised. As Orgone is polarised, that
is , we can have positive or negative Orgonic force, so we can
build a positive or negative cell. But, if you mix your positive
and negative construction materials as most people do, then your
result is a leaky or non-operational cell.
12. It will penetrate or travel along all known materials.
All bodies of continuous structure are equally good conductors
eg. It may travel through 70 feet or more of metal. As such, do
not think that you are trapping it in the cell. The only reason
it stays in the cell at all is because it wants to. It is up to
the experimenter to set up a seeding and breeding environment
that is conducive to Orgone and not try to create an imaginary
prison that the experimenter hopes will trap the Orgone. As a
side note, mankind has created synthetic materials in recent times
that can greatly stop the penetration of Orgone. I am talking
13. It has a slow conduction rate. Orgone will take
20 seconds or more to traverse 50 yards of wire. For the experimenter,
this means that you should wait about 30 seconds after turning
power on to the cell before you can expect to observe Orgone action
at a stable rate.
14. It exhibits a constant upward tendency, raising
vertically. Highly important in creating a non-leaky cell installation
in an car.
15. It cannot remain in steel or water longer than
about 1 hour. Simply said, if you cell is not breeding, it will
die in about 1 hour. This explains the use of a 1.5 Volt battery
across leaky cells to maintain a breeding process. What you achieve
with the small potential across the cell, is a very low rate of
electrolysis that matches the leaking of the cell and thus maintaining
the breeding process.
16. It radiates a great distance. From a typical
cell the radiation circumference is at least 160 feet. Think about
17. It follows optical laws. It can be refracted
by a prism, reflected by polished surfaces, etc. This explains
the reason for the mirrored or highly polished surfaces in some
parts of the cell. It also allows us to control some leaking by
utilising optical laws.
18. It surrounds itself with alternating spherical
zones of opposite polarity. This is utilised by us to determine
cylinder diameters and consequential spacing in the optimisation
of the cell.
19. It is affected by living beings. Again, important,
as the experimenter and his attitude can interact with the cell
20. It can only be concentrated to a finite amount.
If a cell is charged to its maximum degree so that it can hold
no more, the Orgone will transform itself into electricity, and
in this way or form, find a discharge. By the visual observation
of the bubbles, pulsations, and surface tension of the water,
we utilise this fact to our advantage.
21. Torsion ( Orgone ) fields transmit information
without transmitting energy, and they propagate through physical
media without interacting with the media.
22. Torsion ( Orgone ) fields cannot be shielded
by most materials, but can be shielded by materials having certain
spin structures. As in point 12 above.
23. Each physical object, in living or non-living
nature, possesses its own characteristic torsion ( Orgone
24. All permanent magnets possess their own torsion
( Orgone ) field.
25. Torsion ( Orgone ) fields can be generated as
a result of a distortion of the geometry of the physical vacuum.
This is demonstrated by pyramids, cones, cylinders, flat triangles,
26. Torsion ( Orgone ) fields can be screened by
aluminium. This allows the use of aluminium coated mirrors, or
highly polished aluminium to reflect our Orgone ( Torsion ) field.
See point 17 above.
27 It will pass through all materials, but at different
The contents of Joe cell chapters
What is the Joe cell
Some Properties of orgone
Some names for the life force
Theory of Cell Design
materials and design
Sizes and diameters
Water types and relations to cells
Charging the water cell
Connectioning to motors
When Things go wrong
Some Readers contributions
Brotherhood of Man
A Joe cell parts supplier
index page where the contents of these chapters came fom